@2a33c9q6r
2024-12-07 06:16
1060

Hello

My Lucky Miner LV07 is not starting anymore, the firmware seems corrupt. Please provide the latest factory firmware for the LV07 and a short manual how to flash the miner.

Thank you!

7
Sign in You can only post comments after logging in.
@servidorespillo

Hi there.

I did flash try all yes all factory and mereg bin files Lucky Miner LV07 from un-painted-org/ESP-Miner

My Lucky Miner LV07 works OK setup everything works web UI change settings all OK but doesn't mine at all.

Error from log:

₿ (2559065) i2c.master: i2c_master_transmit_receive(1214): I2C transaction failed

₿ (2559065) i2c_bitaxe: Device TPS546.c (0x24)

₿ (2559075) TPS546.c: Could not read Vout

₿ (2559085) i2c.master: I2C transaction unexpected nack detected

₿ (2559085) i2c.master: s_i2c_synchronous_transaction(918): I2C transaction failed

₿ (2559095) i2c.master: i2c_master_transmit_receive(1214): I2C transaction failed

₿ (2559105) i2c_bitaxe: Device TPS546.c (0x24)

₿ (2561105) i2c.master: I2C transaction unexpected nack detected

₿ (2561105) i2c.master: s_i2c_synchronous_transaction(918): I2C transaction failed

₿ (2561105) i2c.master: i2c_master_transmit_receive(1214): I2C transaction failed

₿ (2561115) i2c_bitaxe: Device TPS546.c (0x24)

₿ (2561115) TPS546.c: Could not read VIN

₿ (2561125) i2c.master: I2C transaction unexpected nack detected

₿ (2561125) i2c.master: s_i2c_synchronous_transaction(918): I2C transaction failed

₿ (2561135) i2c.master: i2c_master_transmit_receive(1214): I2C transaction failed

₿ (2561145) i2c_bitaxe: Device TPS546.c (0x24)

₿ (2561155) TPS546.c: Could not read Iout


@2a33c9q6r

there is even a web flasher for the LV07 (and the LV06) to get open source firmware:

https://un-painted-org.github.io/bitaxe-web-flasher/

@2a33c9q6r

I fixed it: LV07 with open source firmware!

https://github.com/un-painted/ESP-Miner-TCH/releases

@dasa97

hi, is there a video tutorial that explains how to check if it is compatible with your lv07 and how to install it?

@servidorespillo

Hi there.

You can flash it on Linux/Raspberry pi Bitaxetool writen in PY

On Windows download flash download tool from official ESPRESSIF.

You need a CP1204 USB to UART 6 pin to connect 2x3 pin on pcb board LV07

And is the same as the video

@458274

Same way as LV06

https://www.youtube.com/watch?v=X0yWDyZ8W0w

@458274

They won't release it

Active Users
43 participate in
37 participate in
34 participate in
18 participate in
3 participate in
2 participate in
2022 Minerfixes - All Rights Reserved