Hi everyone, new here, - not new to mining, new to mining with an ASIC.

Just received my LV08 from MF on Ali, configured it according to instructions and video, connected to my wifi, set it up with PublicPool, - all good so far, but only getting about 2.6TH/s at 80W or so. Messed with the few settings there are, not much different. Have tried plugging it into different outlets, all the same. Have just noticed that the ASIC voltage request is 1.2V but the measured is 0 (zero). Nothing I do seems to affect that or getting the unit to draw more than about 80W except at boot, sometimes it will show a spike in voltage/hashrate for a few seconds, then back down to 2.5-2.6 or so and again, zero ASIC voltage measured. Also, i keep reading about a green light somewhere on the unit, but if I look inside, I see a red light glowing steady. Am I SOL here? Help?