4-terminal arrester network signal

Product detail

Product description:

4-Port Surge Protector 4-port lightning arrester protects against excessive power supply voltage in the event of a short circuit that can cause power disconnection to damaged ports. after the short circuit subsides, the voltage will automatically return to normal.

Parameter:

Rated working voltage: 5V

Maximum continuous working voltage: 6V

Maximum continuous working current: 1A

Nominal discharge current: 5kA

Maximum discharge current: 10kA

Protection level: 15V

Response time: 1ns

Data transfer rate: 1000Mbit/s

Operating temperature: -40°C - 80°C

Shell material: aluminum alloy

Shell protection grade: IP20

Installation precautions:

1. The product is close to the protected equipment;

2. The product is connected in series with the signal cable;

3. The IN terminal is connected to the input, and the OUT terminal is connected to the protection device;

4. When wiring the product, it should be ensured that the electrical characteristics of the access cable are consistent with the terminal identification, that is: the RJ45 interface is connected to the network cable, and the PE is grounded;

5. The grounding can use copper wire of more than 1.5mm, as short, thick and straight as possible;

6. Guide rail products can be installed on 35mm guide rails;

7. Do not tie IN and OUT cable together.

Shipping

We can support express shipping, including DHL, Fedex, TNT, UPS, EMS, etc. At the same time, we also cooperate with professional shipping companies. It can provide door-to-door shipping with customs duties. If you haven't imported before, we can help you out. Looking forward to your cooperation