During the use of the hot melt glue gun, push the glue stick to the top of the catheter to avoid heating the catheter in the air, plug in the power supply to preheat for 1-3 minutes, and do not touch the nozzle with high temperature. It should be placed correctly during use to prevent it from falling glue. When the glue stick is about to be used up, the new glue stick is inserted from the nozzle of the gun into contact with the original glue immediately, and do not pull out the glue stick from the glue inlet.

When the hot melt glue gun is not in use, do not turn on the switch for a time. If the temperature of the glue outlet is high, do not touch it during work, and keep it away from children. store it in a dry and ventilated place, and pay attention to cleaning. do not use inferior glue sticks, so as to prevent impurities from blocking the glue outlet. after the glue gun is used, do not forcibly pull out the unused glue stick, you can continue to use it next time.

Kind tips:

In the process of using the glue gun, new customers often encounter this problem: the glue flows out by itself, which is the so-called glue leakage.

One glue gun is electrified, so the temperature is maintained, and the glue will always melt. If the melted glue is not used up in time, it will flow out by itself. When the trigger is pulled, pressure is generated in the barrel of the gun, and the pressure is not released completely, so a small amount of glue will come out when you stop using it.

Therefore, when the glue gun is powered on, it must be used continuously and quickly, and cannot be left unused. If you want to stop the glue, you must cut off the power supply. The power supply is cut off about 3-5 minutes in advance. when the glue is used up, the temperature will also drop. the glue will not come out, so you can save glue.