HBC-1079 silicone adhesive, used for insulation sealing and moisture-proof, waterproof, mildew-proof, and shock-proof of various heating elements, widely used in household appliances, food machinery, electronic circuit boards, electrical energy, electromagnetic and other industries, for energy-saving lamps, Solar lamps, and handicraft lamps, etc., moisture-proof and leak-proof coating and other sealing purposes.

Main use: clean the surface, clean the surface of the sticky or coated items, and remove rust, dust, oil, etc. Glue: unscrew (or cut off) the cap of the hose, squeeze the glue into the cleaned surface, make it evenly distributed, and close and fix the adhered surface. Curing: Put the parts that are glued or sealed in the air and let them cure naturally. The curing process is a curing process from the surface to the inside. During the process, within 24 hours (room temperature and 55% relative humidity) the adhesive will cure to a depth of 2~4mm. If the part is deep, especially in the part that is not easy to touch the air, the complete curing time will be extended. If the temperature is Lower, the curing time will also be extended. Before further processing or packaging the bonded parts, it is recommended to wait long enough so that the firmness and integrity of the bond are not compromised.

Kind tips:

After the operation is completed, the unused glue should be tightened immediately and the cap should be tightly sealed. When using it again, there is a little crust on the seal, which can be removed. It will not affect normal use. The mouth of the tube may also be damaged during the storage process of the glue. There is a small amount of curing phenomenon, and it can be used normally after removing it without affecting the performance of the product.